Getting Started with your EMT16X

    1. Instructions on Installing Melco OS

    2. Machine Connections Single Source

    3. Selecting Connections (Simplified User Interface)

    4. Powering Up Machines (Simplified User Interface)

    5. Upper Threading

    6. Upper Threading without thread in the machine

    7. Bobbin Threading and Tension

    8. Task: Threading the Machine

    9. Getting Started with Melco EMT16X Session 1 quiz

    10. Completion of: Getting Started with Melco EMT16X Session 1

    1. Screen Overview

    2. Loading a Design

    3. Colorizing the Thread Cone Display & Setting the Color Sequence

    4. Task: Colorizing Thread Cone Display

    5. Selecting a Hoop

    6. Setting Acti-Feed

    7. Setting Machine Speed

    8. Design Orientation and Position

    9. Changing to Advanced Interface

    10. Getting Started with Melco EMT16X Session 2 Simplified User Interface Quiz

    11. Completion of: Getting Started with Melco EMT16X Session 2

    1. Session 3: Introduction

    2. Daily Maintenance

    3. Task: Complete Daily Maintenance

    4. Weekly Maintenance

    5. Task: Complete Weekly Maintenance

    6. Monthly Maintenance

    7. Quarterly Maintenance

    8. Feed Roller Maintenance

    9. Centering the Needleplate

    10. Getting Started with Melco EMT16X Session 3 Simplified User Interface Quiz

    1. Backings and Toppings

    2. Task: Download and Load Test Design

    3. Choosing an Appropriate Hoop

    4. Hooping Technique

    5. Hooping a Shirt

    6. Loading a Garment

    7. Presser Foot Adjust

    8. Trace and Sew

    9. Finishing a Garment

    10. Task: Session Recap and First Sew

    11. Powering Down the Machine

    12. Getting Started with Melco EMT16X Session 4 Simplified User Interface Quiz

    13. Completion of: Getting Started with Melco EMT16X Session 4

    1. Anatomy of a Needle

    2. Task: Identifying the Front and Back of a Needle

    3. Changing A Needle

    4. Task: Change a Needle

    5. Needle Types

    6. Thread Types

    7. Getting Started with Melco EMT16X Session 5 Simplified User Interface Quiz

    8. Completion of: Getting Started with Melco EMT16X Session 5

    1. Session 6: Watch and Work Along

    2. Attaching the Cap Gauge

    3. Installing the Wide Angle Driver

    4. Adjusting the Red Wide Angle Driver

    5. Maintaining the Red Wide Angle Driver

    6. Task: Checking the Red WACF Driver

    7. Selecting Driver

    8. Selecting a Cap Frame

    9. Hooping a cap

    10. Loading a Hooped Cap

    11. Task: Download Test Design

    12. Sew Settings for Caps

    13. Centering a Design on a Cap

    14. Task: Run a Hat

    15. Getting Started with Melco EMT16X Session 6 Simplified User Interface Quiz

    16. Completion of Getting Started with Melco EMT16X Session 6

    17. Task: Closing Statement

About this course

  • 69 lessons
  • 4 hours of video content