Getting Started the with Advanced User Interface

    1. Instructions on Installing Melco OS

    2. Machine Connections Single Source

    3. Selecting Connections

    4. Powering Up Machines

    5. Upper Threading

    6. Upper Threading without thread in the machine

    7. Bobbin Threading and Tension

    8. Getting Started with Melco EMT16X Session 1 quiz

    9. Completion of Getting Started with Melco EMT16X Session 1

    1. Screen Overview

    2. Loading a Design

    3. Setting the Color Sequence

    4. Selecting a Hoop

    5. Setting Machine Speed

    6. Setting Acti Feed settings

    7. Design Orientation and Position

    8. Changing from Advanced Interface to Simplified User Interface

    9. Getting Started with Melco EMT16X Session 2 Advanced User Interface Quiz

    10. Completion of Getting Started with Melco EMT16X Session 2

    1. Session 3: Introduction

    2. Rotary Hook Maintenance

    3. Task: Complete Rotary Hook Maintenance

    4. 2 Million Stitch Maintenance

    5. Task: 2 Million Stitch Maintenance

    6. 10 Million Stitch Maintenance

    7. 30 Million Stitch Maintenance

    8. Feed Roller Maintenance

    9. Centering the Needleplate

    10. Getting Started with Melco EMT16X Session 3 Advanced User Interface Quiz

    1. Session 4: Watch and Work Along

    2. Backings and Toppings

    3. Task: Download and Load Test Design

    4. Choosing an Appropriate Hoop

    5. Hooping Technique

    6. Hooping a Shirt

    7. Loading a Garment

    8. Presser Foot Adjust

    9. Trace and Sew

    10. Finishing a Garment

    11. Task: Session Recap and First Sew

    12. Powering Down the Machine

    13. Getting Started with Melco EMT16X Session 4 Advanced User Interface Quiz

    14. Completion of Getting Started with Melco EMT16X Session 4

    1. Anatomy of a Needle

    2. Changing A Needle

    3. Thread Types

    4. Needle Types

    5. Getting Started with Melco EMT16X Session 5 Advanced User Interface Quiz

    6. Completion of Getting Started with Melco EMT16X Session 5

    1. Session 6: Watch and Work Along

    2. Attaching the Cap Gauge

    3. Installing the Wide Angle Driver

    4. Adjusting the Red Wide Angle Driver

    5. Task: Checking the Red WACF Driver

    6. Selecting a Cap Frame

    7. Hooping a cap

    8. Loading a Hooped Cap

    9. Task: Download Test Design

    10. Sew Settings for Caps

    11. Centering a Design on a Cap

    12. Getting Started with Melco EMT16X Session 6 Advanced User Interface Quiz

    13. Completion of Getting Started with Melco EMT16X Session 6

    14. Task: Closing Statement

About this course

  • 63 lessons
  • 3.5 hours of video content