Getting Started with your BRAVO

    1. Course Introduction

    2. Disclaimer

    3. Instructions on Installing Bravo OS

    4. Machine Connections Single Source

    5. Selecting Connections (Simplified User Interface)

    6. Powering Up Machines (Simplified User Interface)

    7. Upper Threading

    8. Upper Threading without thread in the machine

    9. Bobbin Threading and Tension

    10. Task: Threading the Machine

    11. Getting Started with BRAVO: Session 1 Quiz

    12. Completion of Getting Started with BRAVO Session 1

    1. Screen Overview

    2. Loading a Design

    3. Colorizing the Thread Cone Display & Setting the Color Sequence

    4. Task: Colorizing Thread Cone Display

    5. Selecting a Hoop

    6. Setting Acti-Feed

    7. Setting Machine Speed

    8. Design Orientation and Position

    9. Changing to Advanced Interface

    10. Getting Started with BRAVO: Session 2 Simplified User Interface Quiz

    11. Completion of: Getting Started with BRAVO Session 2

    12. Changing to Simplified User Interface

    1. Session 3: Introduction

    2. Daily Maintenance

    3. Task: Complete Daily Maintenance

    4. Weekly Maintenance

    5. Task: Complete Weekly Maintenance

    6. Monthly Maintenance

    7. Quarterly Maintenance

    8. Centering the Needleplate

    9. Getting Started with BRAVO: Session 3 Simplified User Interface Quiz

    1. Backings and Toppings

    2. Task: Download and Load Test Design

    3. Choosing an Appropriate Hoop

    4. Attaching and Adjusting Hoop Arms

    5. Hooping Technique

    6. Hooping a Shirt

    7. Loading a Garment

    8. Presser Foot Adjust

    9. Trace and Sew

    10. Finishing a Garment

    11. Task: Session Recap and First Sew

    12. Powering Down the Machine

    13. Getting Started with BRAVO: Session 4 Simplified User Interface Quiz

    14. Completion of: Getting Started with BRAVO Session 4

    1. Anatomy of a Needle

    2. Task: Identifying the Front and Back of a Needle

    3. Changing A Needle

    4. Task: Change a Needle

    5. Needle Types

    6. Thread Types

    7. Getting Started with BRAVO: Session 5 Simplified User Interface Quiz

    8. Completion of: Getting Started with BRAVO Session 5

    1. Session 6: Watch and Work Along

    2. Attaching the Cap Gauge

    3. Installing the Wide Angle Driver

    4. Adjusting the Red Wide Angle Driver

    5. Task: Checking the Red WACF Driver

    6. Selecting a Cap Frame

    7. Hooping a cap

    8. Loading a Hooped Cap

    9. Task: Download Test Design

    10. Sew Settings for Caps

    11. Centering a Design on a Cap

    12. Presser Foot Adjustment

    13. Getting Started with BRAVO: Session 6 Simplified User Interface Quiz

    14. Completion of: Getting Started with BRAVO Session 6

    15. Task: Closing Statement

    16. Maintaining the Red WACF Driver

About this course

  • 71 lessons
  • 3.5 hours of video content