Getting Started with your EMT16X

    1. Instructions on Installing Bernina OS

    2. Disclaimer

    3. Machine Connections Single Source

    4. Selecting Connections (Simplified User Interface)

    5. Powering Up Machines (Simplified User Interface)

    6. Upper Threading

    7. Upper Threading without thread in the machine

    8. Bobbin Threading and Tension

    9. Task: Threading the Machine

    10. Session 1: Quiz

    11. Completion of Session 1

    1. Screen Overview

    2. Loading a Design

    3. Colorizing the Thread Cone Display & Setting the Color Sequence

    4. Task: Colorizing Thread Cone Display

    5. Selecting a Hoop

    6. Setting Acti-Feed

    7. Setting Machine Speed

    8. Design Orientation and Position

    9. Changing to the Advanced Interface

    10. Changing to Simplified Interface

    11. Session 2: Quiz

    12. Completion of Session 2

    1. Session 3: Introduction

    2. Daily Maintenance

    3. Task: Complete Daily Maintenance

    4. Weekly Maintenance

    5. Task: Complete Weekly Maintenance

    6. Monthly Maintenance

    7. Quarterly Maintenance

    8. Centering the Needleplate

    9. Session 3: Quiz

    1. Backings and Toppings

    2. Task: Download and Load Test Design

    3. Choosing an Appropriate Hoop

    4. Moving Hoop Arms

    5. Hooping Technique

    6. Hooping a Shirt

    7. Loading a Garment

    8. Finishing a Garment

    9. Task: Session Recap and First Sew

    10. Powering Down the Machine

    11. Session 4: Quiz

    12. Completion of Session 4

    1. Anatomy of a Needle

    2. Task: Identifying the Front and Back of a Needle

    3. Task: Change a Needle

    4. Needle Types

    5. Thread Types

    6. Session 5: Quiz

    7. Completion of Session 5

    1. Session 6: Watch and Work Along

    2. Attaching the Cap Gauge

    3. Installing the Wide Angle Driver

    4. Adjusting the Red Wide Angle Driver

    5. Maintaing the Red WACF Driver

    6. Task: Checking the Red WACF Driver

    7. Selecting a Cap Frame

    8. Hooping a cap

    9. Loading a Hooped Cap

    10. Task: Download Test Design

    11. Sew Settings for Caps

    12. Centering a Design on a Cap

    13. Task: Sewout on a Cap

    14. Session 6: Quiz

    15. Completion of Session 6

    16. Task: Closing Statement

About this course

  • 67 lessons
  • 3.5 hours of video content